Kenwood HD-7 - Manual (Page 8)

HD-7/EN
8
Basic
System connections
Make connections as shown below.
When connecting the related system components, refer also to the instruction manuals of the related com-
ponents.
Do not plug in the power lead until all connections are
completed.
CAUTION
Be sure to adhere followings. Or proper ventilation
will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation
onto the top of the unit.
÷ Leave some space around the unit (from the larg-
est outside dimension including projection) equal
to or greater than, shown below.
Top panel : 50 cm
Back panel : 10 cm
CAUTION
Malfunction of microcomputer
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microcomputer by
referring to "In case of difficulty". w
1 2 3
AM loop antenna
The supplied antenna is for indoor use. Place it as
far as possible from the main system, TV set,
speaker cords and power cord, and set it to a di-
rection which provides the best reception.
FM indoor antenna
The supplied antenna is for temporary indoor use only. For stable signal
reception, we recommend to use an outdoor antenna. Remove the in-
door antenna if you connect to an outdoor antenna.
1
Connect the antenna to the antenna terminal.
2
Locate the position providing good recep-
tion condition.
3
Fix the antenna.
Connection of accessory antennas