Kenwood HD-7 - Manual (Page 34)

HD-7/EN
34
Application
Setting auto power save (A.P.S.)
When the auto power save function is set to ON,
the power is switched off (standby) automatically
when about 30 minutes without any operation
have passed after the end of CD playback.
1 Select "A.P.S, SET ?" as follows.
1 Press the "menu" key.
2 Select "A.P.S, SET ?" with
the "volume/multi control"
knob.
When the "volume/multi control"
knob is turned, switching is done
as follows.
"AUX INPUT ?"
"TONE ?"
"BALANCE ?"
"TIME ADJUST ?"
"TIMER SET ?"
"A.P.S. SET ?"
"DIMMER ?"
1
2
3
Return to the original status is
made when no operation is per-
formed within 20 seconds.
3 Press the "set" key.
2 Turn the "volume/multi control" knob to
select ON or OFF and press the "set" key.
OFF ON
A.P.S.
Lit when ON
Auto power save operates when there is no op-
eration for about 30 minutes after the following
events.
When the input is CD
During stop
When the input is tuner, tape, or external input
When the volume/multi control level
is the minimum level or mute.
Adjusting the brightness of the
display part (DIMMER)
When the display is felt to be too bright or too dim
at night etc., the brightness can be adjusted.
1 Select "DIMMER ?" as follows.
1 Press the "menu" key.
2 Select "DIMMER ?" with the
"volume/multi control" knob.
When the "volume/multi control
knob" is turned, switching is done
as follows.
"AUX INPUT ?"
"TONE ?"
"BALANCE ?"
"TIME ADJUST ?"
"TIMER SET ?"
"A.P.S. SET ?"
"DIMMER ?"
1
2
3
Return to the original status is
made when no operation is per-
formed within 20 seconds.
3 Press the "set" key.
2 Turn the "volume/multi control" knob to
select the desired brightness and press the
"set" key.
Darker Brighter
L
R
30 10 5 3 1 0 (–dB)
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
DIGITAL
When the brightness has been
increased
When the brightness has been
decreased
÷ Adjustment is not possible when the power
is off.
Various CD playback features