Kenwood HD-7 - Manual (Page 36)

HD-7/EN
36
Application
Timer operation
Sleep timer (SLEEP)
The unit is turned OFF automatically after the
specified period has elapsed.
Timer playback
(PROG. 1, PROG. 2)
‡
Playback of the selected input source of the CD,
TUNER or AUX input starts at the specified time.
AI timer playback (PROG. 1, PROG. 2) ‡
When timer playback starts, the volume level in-
creases gradually until the set volume level is
reached.
Set the number of minutes after which the unit is
to be turned OFF.
Sleep timer (SLEEP)
Press the "SLEEP" key during CD playback,
tuner reception, etc.
Remote control unit only
SLEEP
L
R
30 10 5 3 1 0 (–dB)
÷ Each press increases the timer period by 10
minutes. The sleep timer can be set up to 90
minutes.
=10 = 20 = 30 ..... 70 = 80 = 90 = Cancel
÷ The unit is turned OFF automatically af-
ter the set time has elapsed.
To cancel
Turn the unit OFF or press the SLEEP key until
the sleep timer is canceled.
The system has been set up so that the display
is dimmed automatically while the sleep timer
is activated.
Adjust the clock before setting the timer fi
When the power fails or the plug of the power cable is disconnected from the receptacle during
power off (standby) after timer setting, the standby/timer indicator will flash green. In this
case, repeat the time setting.