Kodak 6000 - Manual (Page 53)

43
Chapter 7
...from the
computer. The USB cable is not
securely connected. Check the connections ( page 26 )
and try again.
The print job is paused
or held in the print
queue. Access the printer menu for your
system. Make sure no check mark
appears next to the Pause Printing
option.
The battery monitor or
similar software runs
constantly. Close that software before starting
the Kodak software.
The computer is
transferring images. Wait a few seconds, then try to print
from the computer.
The computer is
unable to detect the
printer dock or the
camera. 1 Finish the current print job (if
in standalone mode).
2 End slide show (if it is
running).
3 Check the connections
(
page 26 ) and try again.
Printing
Problem Cause Action/Solution
urg_00041.book Page 43 Friday, January 3, 2003 10:37 AM