Kodak 6000 - Manual (Page 36)

26
Chapter 5
On Mac OS X:
1 Double-click the operating drive for your system.
2 Select Library, then select Printers.
3 Open the Kodak folder, then double-click Kodak PD6000 Uninstaller.
Follow the on-screen instructions.
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came
with your Kodak EasyShare camera. To purchase one separately, see a retail
dealer of Kodak products or visit
www.kodak.com/go/printerdock .
CAUTION:
Make sure your camera is NOT in the printer dock when
you are connecting to the computer.
1 Make sure the power is connected to the printer dock (see Connecting the
Power, page 5 ), and the Kodak EasyShare printer dock 6000 software is
installed on the computer (see Installing the Software, page 24 ).
2 Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3 Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.
4 Route the cable through the channel located
on the underside of the printer dock, so that
the cable does not interfere with the paper
path.
urg_00041.book Page 26 Friday, January 3, 2003 10:37 AM