Konica Minolta DiMAGE A2 - Manual (Page 98)

Int. set –
Bracket set 0.3Ev
Data imprint Text
Imprint to Image + Exif
Inst.playback Off
Voice memo Off
98 R ECORDING MENU
DATA IMPRINTING
Data can be printed on a still image and saved to the file’s Exif data. The function must
be activated before the image is taken. Once activated, data will continue to be imprinted
until the function is reset; a yellow bar is displayed behind the frame counter on the
monitors to indicate the function is active. Data imprinting is selected in section 2 of the
recording menu (p. 80). Data imprinting cannot be used with TIFF, RAW, and RAW &
JPEG image quality. Only one imprinting format can be used with each image.
Off
YYYY/MM/DD
MM/DD/hr:min
Text
Text + ID#
Menu option
Data imprinting function disabled.
Prints the date and time the image was taken.
To imprint alphanumeric characters. When this option is selected,
the electronic keyboard opens (p. 99).
To imprint text with a serial number. As each successive image is
captured, the ID number will increase by one. When this option is
selected, the electronic keyboard opens (p. 99). The serial number is
reset every time this option is selected.
The data can be imprinted in the lower right corner of the
image when viewed horizontally as well as to the file’s Exif
data, or to the Exif data only. The Exif data can be seen with
the DiMAGE Viewer software. The imprinting location is
selected with the imprint-to option in section 2 of the menu.
Prints the year, month, and day the image was taken. The date
format can be changed with Date/Time set option in section 2 of the
setup menu (p. 30).
Imprinting
indicator