Konica Minolta DiMAGE A2 - Manual (Page 155)

155
The hardware devices to be stopped will be
displayed. Highlight the device by clicking on it
then click “Stop.”
Confirm that the access lamp is not lit and then drag
the mass-storage device icon and drop it into the
trash. Disconnect the USB cable.
A confirmation screen will appear to
indicate the devices to be stopped.
Clicking “OK” will stop the device.
A third and final screen will appear
to indicate the camera can be safely
disconnected from the computer;
click OK. Turn off the camera and
then disconnect the USB cable.
MACINTOSH