Konica Minolta DiMAGE A2 - Manual (Page 138)

138 S ETUP MENU
NEW FOLDER
This allows the creation of new folders. The folder-name
option on in section 2 of the setup menu must be set to
standard form in order to use the new-folder function. When
selected, the electronic keyboard (p. 99) automatically
appears so the folder name can be entered. Once the name
is typed in and the enter button on the keyboard is
highlighted and entered, the folder will be created and the
name will be listed in the select-folder option.
DATE AND TIME SETUP
It is important to accurately set the clock. When a still image or a movie clip is recorded,
the date and time of the recording are saved with the image and are displayed during
playback or can be read with the DiMAGE Viewer software included on the CD-ROM.
The camera’s clock is also used with data imprinting.
Custom set DOF preview
File # memory Off
Folder Name
Std. form
Select folder 100KM003
New folder –
Date/Time set –
Every folder name begins with a three digit index number. When the electronic keyboard
activates, three digits will be displayed in the register. This number cannot be changed.
Every time a new folder is created, the folder number will increase automatically by one
greater than the highest folder number on the memory card. A five-character folder name
must be entered after the number; only capital letters, numbers, and the underbar can be
used. To cancel the electronic-keyboard display without creating a new folder, press the
menu button.
2003 . 10 . 23
13 : 14
Date/Time set
:enter :move :sel
YYYY/MM/DD
When the Date/Time-set option is selected and
entered, the date/time screen will be displayed.
The left/right keys of the controller are used to
select the item to be changed and the up/down
keys are used to change the value. When the
date and time have been adjusted, set the clock
by pressing the central button of the controller.