Kodak EasyShare 5100 - Manual (Page 66)

Chapter 8
No Communication with Computer
Your EasyShare AiO is not connected to your computer.
1 Make sure you are using the proper USB Cable.
2 Check the connection from your computer to your AiO printer. Ensure that the square end of the USB
cable is plugged in to the USB port on the back of your AiO printer, and the flat end into a USB port on
your computer.
3 You may need to disconnect other printers or scanners from your computer.
4 After checking connections, restart your computer.
5 Make sure your computer meets the minimum system requirements. Upgrade your system if
necessary.
For more information on connecting your Kodak AiO printer to your computer, see the Setup Poster that
came with your unit.
No Paper Feed
Paper does not feed. Paper light may be flashing red.
IMPORTANT: For best result, use only Kodak Ink cartridges and paper for your printer.
The paper tray(s) may be empty. Load paper into the paper tray(s), then press Start.
Check the paper
1 Disengage the Photo tray.
2 Inspect the paper and make sure paper no sheets are damaged in any way. Reload with new paper if
necessary.
3 Carefully "fan" the paper to keep the sheets from sticking together.
4 Reload the paper tray(s). Do not overfill.
5 E ngage the Photo tray, if printing 4 x 6 Photo’s, then press Start to resume printing.
62 Kodak EasyShare 5100 AiO