Kenwood eXcelon KAC-X1R - Manual (Page 5)

English 5
POWER IN
SPEAKER OUTPUT
LINE OUT FILTER
REMOTE RESET LINE IN LINE OUT
ON OFF FUSE (25A s3)
25 25 25
POWER IN
SPEAKER OUTPUT
LINE OUT FILTER
REMOTE RESET LINE IN LINE OUT
ON OFF FUSE (25A s3)
25 25 25
POWER IN
SPEAKER OUTPUT
LINE OUT FILTER
REMOTE RESET LINE IN LINE OUT ON OFF FUSE (25A s3)
25 25 25
LINE OUT FILTER
ON OFF
LINE OUT FILTER
ON OFF
4
0.2(MAX) (MIN)5
3
2
1
0.5
INPUT SENSITIVITY(V)
4
0.2(MAX) (MIN)5
3
2 1
0.5
INPUT SENSITIVITY(V)
LINE OUT FILTER
ON OFF
4
0.2(MAX) (MIN)5
3
2
1
0.5
INPUT
SENSITIVITY(V)
40 200
150 100 70
LPF FREQUENCY(Hz)
LPF
ON
OFF
40 200
150 100 70
LPF
FREQUENCY(Hz)
LPF
ON
OFF
40 200
150 100 70
LPF FREQUENCY(Hz)
LPF
ON
OFF
Remote cable
Remote controller
CENTER UNIT
(CD receiver, etc.)
You can control the Bass boost level of the second
and subsequent Slave amplifiers simultaneously
from the Master amplifier.
The volume level of each amplifier is determined
by the setting of the Master amplifier (INPUT
SENSITIVITY, boost level of the remote controller).
Setting the Master amplifier
1. Adjust the "INPUT SENSIVITY" to the output of
the center unit to be connected.
2. Set the LPF frequency and Bass boost level.
3. Turn the "LINE OUT FILTER" switch "ON".
Setting the Slave amplifier
1. Turn the "LINE OUT FILTER" switch "OFF".
2. Adjust the "INPUT SENSIVITY".
• To adjust the Slave amplifier to the same
volume as the Master amplifier, adjust the
"INPUT SENSIVITY" to "0.2 V (max.)".
2CAUTION
• Before connecting the remote controller
cables, always turn the Bass boost level knob
all the way to the left.
* Commercially available parts
■ Multi Amplifier with Remote cable connection ( Accessory of KAC-PS1D. Optional accessory for KAC-X1R.)
Master amplifier
Slave amplifier
Slave amplifier
Power control wire
Extension wire*
RCA cable*
RCA cable*