Kenwood HD Radio TUNER - Manual (Page 3)

English | 3
Safety precautions
Control Units that can be Connected
As for connectable control units that have been
sold since July 2003, operation of HD Radio is
explained in the manual of the control unit.
Model list (as of february, 2005)
DDX7015 #5 ,
Ez500, Ez700SR,
KDC-228,
KDC-3028, KDC-328,
KDC-722
#3, 4 ,
KDC-MP2028, KDC-MP228,
KDC-MP4028, KDC-MP425
#4 , KDC-MP428,
KDC-MP5028, KDC-MP528,
KDC-MP6025, KDC-MP625
#2 , KDC-MP628 #3 ,
KDC-MP7028 #3 , KDC-MP728 #3 ,
KDC-MP822 #3, 4 , KDC-MP825 #2, 3, 4 , KDC-MP828 #3 ,
KDC-MP922 #1, 2, 3, 4 , KDC-MP925 #2, 3, 4 ,
KDC-MPV5025 #2, 4 , KDC-MPV525 #4 ,
KDC-MPV8025 #2, 3, 4 ,
KDC-V7022 #2, 3, 4 ,
KDC-X579 #2, 4 , KDC-X589,
KDC-X679 #2 ,
KDC-X769 #2, 3, 4 , KDC-X789 #3 ,
KDC-X869 #1, 2, 3, 4 , KDC-X879 #2, 3, 4 , KDC-X889 #3 ,
KDC-X969 #1, 2, 3, 4 , KDC-X979 #2, 3, 4 ,
KVT-715DVD #5 , KVT-815DVD #5 , KVT-915DVD #5
• Use of the tuner function built into the control unit will
be no longer possible. A portion of the setting methods
including the Tuning Mode will change.
• The setting of the CRSC is always ON. Switching to OFF is
not possible.
• The display of the capital and small letters may be
differed depending on the model.
• This manual does not cover operations using menus.
See the control unit instruction manuals for the menu
operations.
• #1 The RDS function will be no longer possible. Also note
that the "SYNC" and "TI" items in the menu will be
displayed, but will not function.
• #2 The HD Radio cannot be selected as a dual zone
source.
• #3 This model has the Multi key system.
• #4 Some of the functions are set up by Menu for this
model.
• #5 Refer to this manual for the operation. See the manual
of the control unit for the operation method.
2WARNING
To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly approved
in the instruction manual. The user could lose
the authority to operate this equipment if an
unauthorized change or modification is made.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.