Kenwood HM-335 - Manual (Page 26)

Recording on TAPE
26 EN
1. Load a tape in deck.
2. Select the tape transport direction.
1
Press the TAPE
2 3 key.
2
Stop playback.
To reverse the transport direction :
÷ When recording is started, the tape is transported in the direction se-
lected in this step.
Check the tape transport direction indicator.
*
÷ Search the position you want to start recording in advance.
Start recording/ Pause the recording
Stop the recording
Recording on TAPE
Do not use a cassette with more than 90-minute recording time, for the
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting off tape.
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type
) tapes.
0 push open
TAPE
÷ When there is a tape slack, wind the tape before loading. r
Stop the recording
1
Press the area marked
0 push open to open the cassette
holder.
2
Insert a tape.
3
Press the area marked
0 push open to close the cassette
holder.
0 push open