Kenwood HM-335 - Manual (Page 21)

Playback of TAPE
21 EN
Receiving broadcast station
1
Select the tuner input.
2
Select "AUTO MEMORY ?"
(or "AUTO PRESET ?").
Collective presetting of stations
÷ A maximum of 30 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended sta-
tion has not been preset, please also use "One-by-one
presetting (Manual preset)".
AUTO MEMORY ..... For U.K. and Europe
AUTO PRESET ........ For other countries
Channel space setting (Except for U.S.A., Canada, U.K., Europe and Australia)
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
CHANNEL
Space Frequency
Area
1
2
USA, Canada and South
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
1
Turn power on.
2
While holding TUNER/band key pressed,
turn the volume knob to select "FM 50 k" or
"FM 100 k".
3
Set it.
TUNER/band
volume
÷ At FM 50 kHz, the corresponding AM frequency is 9 kHz.
At FM 100 kHz, the corresponding AM frequency is 10 kHz.
Main unit only
Main unit only
TUNER/band
\ \ \ \
mode set/sound
set/sound
S S
Each turn switches the space frequency alter-
nately.
1 FM 50 k
2 FM 100 k