beautypg.com

Digital connections, Ac-3 rf demodulator dem-999d, System connection – Kenwood C-V750 User Manual

Page 7: 1 power indicator, 2 lock indicator, 3 ac-3 digital output (coaxial), 4 ac-3 rf input, 5 power switch, 6 dc in (12v) jack

background image

7

C-V750 (En/T)

AC-3 DIGITAL

OUTPUT

AC-3 RF

OFF ON

INPUT

DC IN

12V

@ #

POWER

LOCK

LASER DISC RF DEMODULATOR DEM-999D

IN

IN

TAPE 2

(MONITOR)

FRONT

REC

REC

PLAY

PLAY

VOICE
ACTIVATE

MONITOR

OUT

SURROUND

AUDIO

VIDEO

CENTER

INPUT

AC-3

SUBWOOFER

LD

VCR

CABLE
/ SAT.

LD

DVD

DVD 6CH.INPUT

DIGITAL IN

DIGITAL IN DIGITAL IN

DIGITAL IN

AUDIO

VIDEO

POWER

LOCK

LASER DISC RF DEMODULATOR DEM-999D

2

1

AC-3 DIGITAL

OUTPUT

AC-3 RF

OFF ON

EXTERNAL DC SUPPLY DC 12V

INPUT

DC IN

12V

@ #

5

3

4

6

Orange RCA pin
cord

COAXIAL DIGITAL OUT

(AUDIO)

Orange RCA pin cord

AC-3 RF OUT

(AUDIO)

AC-3 RF Demodulator
(DEM-999D)

Make connections as shown below.
The digital in jacks can accept either Dolby Digital (AC-3) or PCM signals (the input signal type is detected automatically).
When connecting the related system components, be sure to also refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all connections are completed.

Digital connections

Connect components capable of output-
ting Dolby Digital (AC-3) or standard PCM
format digital signals.

To connect an LD player with a DIGITAL RF OUT.
Connect the LD player to the KENWOOD RF digital demodulator (DEM-999D).
Then connect the demodulator to the AC-3 AUDIO INPUT DIGITAL IN.
Connect the video signal and analog audio signals to LD jacks (See "Connection
of video components".)

Connect the video signal and analog audio
signals to the DVD jacks.
(See "Connection of video components".)

AC-3 RF Demodulator DEM-999D

1 POWER indicator

Lights (red) when the power switch (

5) is set to ON .

2 LOCK indicator

Lights when an AC-3 RF signal is input to the AC-3 RF INPUT jack (

4).

3 AC-3 DIGITAL OUTPUT (coaxial)

Connect this jack to the LD, AC-3 AUDIO INPUT (DIGITAL), jack on
your AV CONTROL CENTER.
It outputs AC-3 coaxial digital signals when the POWER (

5) is set to

ON and an AC-3 RF signal is input to the AC-3 RF INPUT jack (

4).

4 AC-3 RF INPUT

Connect this jack to the AC-3 RF OUTPUT jack on your LD player.

5 POWER switch

Use to switch the power ON/OFF.

6 DC IN (12V) jack

Connect this jack and inlet power cord to the AC adaptor supplied with

your demodulator. Connect the power cord to a wall outlet after
completing all of the other connections.

Place the power supply away from the demodulator, AV
CONTROL CENTER, and any antennas.

The connected components are given as examples because the avail-
able models vary depending on marketing areas.

To connect a DVD player
with a DIGITAL OUT

RCA pin cord

System connection