Kenwood C-V750 - Manual (Page 48)

48
C-V750 (En/T)
AV CONTROL CERTER KC-2
1
Example: Adjustment to 8:15
CLOCK
÷ The time is represented in 12-hour AM/PM method.
÷ Press the CLOCK key. The hour is entered and the minute display
starts to blink.
3
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the CLOCK key at the same moment as
a time announcement.
2
TUNING
PTY SELECT
TUNING
PTY SELECT
CLOCK
CLOCK
1 Input selection display
2 DOLBY/DSP/STEREO display
3 Clock display (about 5 seconds)
Main Menu
ENTER
Main Menu
ENTER
Display
ENTER
÷ The time display starts to blink.
Clock adjustment
This unit incorporates a clock function. Be sure to adjust the
correct time before using the timer function.
The time display blinks after a power failure or
when the power cord has been unplugged from
the AC outlet and plugged in again. In such a
case, adjust the clock again.
Activate the clock adjustment mode.
1 Press the CLOCK key.
Enter the hour.
1
2 Press the CLOCK key.
To decrease
the figure To increase
the figure
Enter the minute.
1
2 Press the CLOCK key.
To decrease
the figure To increase
the figure
The displayed information
can be switched every
time the Display icon is
selected.
Main unit
Main unit
Main unit
GRC
: Keys or controls to be used in this operation
Displaying the Time
A M 1 2:) )
A M 8:) )
A M 8:1 5
Each press switches the indication.
R O L O G I P C A M 8:1 7
MHz
8 9;) )