Kenwood C-V750 - Manual (Page 46)

46
C-V750 (En/T)
2 Entry
Each press switches
the indication.
1 ARENA
2 JAZZ CLUB
3 STADIUM
4 CATHEDRAL
5 THEATER
1
2
3
3 EFFECT
4 WALL
5 ROOM
6 BASS
7 TREBLE
8 L- - - - - - -R
9 Cch
0 SRch
! SLch
@ SWch
# INPUT
MODE MUL
MULTI.CONTROL
LEVEL
ENTER
Effect
Level
2
Sound
DSP
ENTER
ENTER
ENTER
ENTER
ENTER
DSP Mode
O DSP
MODE MU
Setup DSP Parameter
Sml Med Lrg
Room Size
Soft Med Hard
Effect
Level
Wall Type
1
Arena
Sound DSP Mode
ENTER
Set Up
Setup DSP Parameter
Sml Med Lrg
Room Size
Soft Med Hard
Effect
Level
Wall Type
1
Setup of the surround effect parameters
(DSP)
Select the DSP surround mode.
1 Select DSP.
Ambience effects
1 Selection cursor
÷ The effects of adjustments are applied equally to sound fields 1 to 5.
÷ Switching is not possible when the 6ch INPUT is used. Select the adjustment parameter.
1 Display the setup screen.
To quit the setup mode in the middle:
If no key has been pressed for about 5 seconds, the setup
display disappears and the display returns to the status
before the setup mode was entered.
(Main unit display)
Each press switches the
adjustment parameters.
Select an adjustment parameter icon
by moving the cursor.
÷ Setup/adjustment operations 6 to # are to be performed only when
required.
Adjust the effect level. “EFFECT”
3 Enter the setup.
Select the step “ 4” icon.
1 Confirm the ”EFFECT“ Level adjustment
display.
2 Adjust the level as required.
To decrease To increase
Go to adjustment step“ 4”.
÷ The EFFECT level can be adjusted between 1 and 5.
Main operation menu
(The displayed icons are variable depending
on the model.)
Main unit GRC Main unit GRC
Main unit GRC
Main unit GRC
Main unit GRC
To decrease To increase
Select icon as required.
E F F E C T 2
÷ This can be selected when the input signal is other than Dolby Digital
(AC-3).