Konica Minolta BIZHUB 920 User Manual

Page 90

FMT_MTD.1[3]

In MNG.ADM, the change of use BOX password is permitted and executed by only the

administrator.

Therefore, FMT_MTD.1[3] is realized by implementing MNG.ADM.

FMT_MTD.1[4]

In IA.PASS, the change of User BOX password is permitted and executed by only the general user

who owns User BOX.

Therefore, FMT_MTD.1[4] is realized by implementing IA.PASS.

FMT_MTD.1[5]

In IA.PASS, the change of administrator password is permitted and executed by the administrator.

Therefore, FMT_MTD.1[5] is realized by implementing IA.PASS.

FMT_MSA.1

In MNG.ADM, the registration of User BOX identifier is permitted and executed to create the

User BOX by only the administrator.

Therefore, FMT_MSA.1 is realized by implementing MNG.ADM.

FMT_MSA.3

In MNG.ADM, the registration of User BOX identifier and the setting of User BOX password to

the User BOX, needed for the initialization of User BOX, are permitted and executed by the

administrator. The User BOX is created at first in the limited state that nobody can register the User

BOX identifier, then the state that the general user can use it by setting the User BOX password.

Therefore, FMT_MSA.3 is realized by implementing MNG.ADM.

FMT_MOF.1

Setting the validity of security functions regulated in this ST is permitted and executed by the

administrator in MNG.MODE.

Therefore, FMT_MOF.1 is realized by implementing MNG.MODE.

FMT_SMF.1

The function to manage the administrator password is implemented in IA.ADM_ADD. The

function to manage the administrator, CE, and User BOX passwords is implemented in IA.PASS.

The function to manage the User BOX is implemented in MNG.ADM.

Therefore, FMT_SMF.1 is realized by implementing IA.ADM_ADD, IA.PASS, and MNG.ADM.