Konica Minolta BIZHUB 920 - Manual (Page 64)

6.1.4. Management Support Function
The management function provides the following a group of security functions.
Function title Specification of security function
TOE security functional
requirement
MNG.MODE
Setting of
security
reinforcement
mode
MNG.MODE permits only the administrator
to execute only the administrator the check
function of TOE password length, the HDD
identification and authentication function,
the record function of audit information, the
function that validates identification and
authentication, and the function that stops
their functions.
FMT_MOF.1
FPT_RVM.1
MNG.ADM
Management
support
function
(Administrator)
MNG.ADM permits only the administrator
to execute the following operations.
- Creation of User BOX, registration of User
BOX identifier, and setting of User BOX
password
- Inquiry of audit information (No the
deletion function of audit information)
For the User BOX password entered by the
administrator, the permitted value is valid-
ated according to the following rules.
- Password of 8 to 64 characters
- Password of English characters, one-byte
capital letters, small letters, and numerals
- Prohibition of the same password with that
used one generation ago
In the validation of permitted value, the
administrator is registered if the rules are
obeyed, and it is rejected if not so.
The inquiry of audit information has the
information for the date and time
FDP_ACC.1[2]
FDP_ACF.1[2]
FIA_SOS.1[1]
FMT_MSA.1
FMT_MSA.3
FAU_STG.1
FAU_SAR.2
FAU_SAR.1
FMT_SMF.1
FMT_SMR.1
FPT_RVM.1
Copyright© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved