Sennheiser SK 5212 - Manual (Page 26)

25
Loading the factory pre-set default settings – RESET
Via the “ RESET ” menu, you can load the factory pr e-set default settings.
Af ter the reset, the standard display is shown on the LC display panel .
Activating/deactivating the automatic lock mode –
LOCK
The transmitter has an autol ock function (automatic lock mode) that can
be activated or deactivated via the “
LOCK ” menu. When the autolock
function is activated, the lock mode is automatically activated 10 seconds
after pressing the last button. The lock mode protects the tr ansmitter from
accidental pr ogramming.
Low-cut frequency flat
Microphone sensitivity 0 dB
Name SK5212
Standard display frequency
Autol ock function deactivated
Channel FIX 01
Output power high
Frequencies in the channel bank “VAR” are reset.
̈
In the selection mode of the “ L OCK ” menu, press
the multi-function switch
¾
(switch position
țSET
).
The curr ent setting of the autolock function is
displayed.
̈
Change the setting by sliding the mul ti-
function switch
¾
to the position
̆
(UP) or
̄
(DOWN).
Select “LOC.ON” to activate the autolock func-
tion or select “ LOC.OFF” to deactivate the auto-
lock function.
̈
Store your setting by pressing the multi-
function switch
¾
(switch position
țSET
).
SET
DOWN UP
¾
RF
RF