Sennheiser SK 5212 - Manual (Page 24)

23
Entering a name – NAME
Via the “ NAME ” menu, you can enter a freely selectable name for the
transmitter . This name can be displayed on the standard display and can
consist of up to six char acters such as:
!
letters (without pronounciation marks),
!
numbers from 0 to 9,
!
special char acters and spaces.
Af ter you have changed to the setting mode of the “ NAME ” menu, the first
segment starts flashing on the LC display panel
¿
.
̈
The current frequency of the selected channel
is displayed.
Change the frequency by sliding the multi-
function switch
¾
to the position
̆
(UP) or
̄
(DOWN).
̈
Store your setting.
̈
Slide the multi-function switch
¾
to the posi-
tion
̆
(UP) or
̄ (DOWN) to select a character.
(By sliding the switch only once, the display
jumps either f orwards or backwards to the next
character . If you keep the switch sl id, the dis-
play starts cycling continuously.)
̈
Press the mul ti-function switch
¾
(switch
position
țSET
) to change to the next segment.
̈
Have you entered the name completely? Press
the multi-function switch
¾
(switch position
țSET
) to store your setting. “STORED” appears
on the LC display panel
¿
.
RF
MHz
MHz
SET
DOWN UP
¾