Sennheiser SK 5212 - Manual (Page 23)

22
The frequencies ar e tunabl e in 5-kHz steps within a switching bandwidth of
36 MHz max.
Note:
When operating a multi-channel system, make sure to only use inter-
modulation-free frequencies.
There are two options for setting the frequencies:
!
You can set a new frequency for the selected channel:
!
You can change to a dif ferent channel and set a new frequency f or the
new channel:
̈
In the selection mode of the “ TUNE ” menu,
press the multi-function switch
¾
(switch
position
țSET
). The current channel number
appears on the display and then the currently
assigned f requency is displayed.
̈
Change the frequency by sliding the multi-
function switch
¾
to the position
̆
(UP) or
̄
(DOWN).
̈
Store your setting.
̈
Pr ess the mul ti-function switch
¾
(switch
position
țSET
) for a longer time. The cur rent
channel f lashes on the display.
̈
Select a new channel by sliding the multi-
function switch
¶
to the position
̆
(UP) or
̄
(DOWN).
̈
Confirm your selection by pressing the multi-
function switch (switch position
țSET
).
SET
DOWN UP
¾
CH
CH
MHz
MHz
CH
CH
SET
DOWN UP
¾
CH
RF
CH