Sharp XG-C50X - Manual (Page 71)

Easy to Use Functions
-69
Selecting the Economy Mode
These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Mode
Select “Power Save” in “Economy
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
Note
• Although lamp life and noise are improved
when “Power Save” is set to “ON”, bright-
ness decreases by 20%.
• “Power Save” mode is factory preset to
“OFF”.
Monitor Out/RS-232C
Off Function
This projector consumes power when using a
monitor connected to the OUTPUT (INPUT 1,
2) terminal and a computer connected to the
RS-232C terminal. When not using these ter-
minals, “Mntr.out/RS232” can be set to “OFF”
to reduce standby power consumption.
Select “Mntr.out/RS232” in “Economy
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
ON
Monitor Out/RS-232C connection
is set to “ON”.
OFF
Monitor Out/RS-232C connection
is set to “OFF”.
Note
• Set “Mntr.out/RS232” to “ON” when using
the Sharp Advanced Presentation Software.
Brightness
80%
100%
Status
ON
(Low power
mode)
OFF
(Standard
mode)
Power
consumption
290 W
340 W
Lamp Life
2,000 hours
1,500 hours