Troubleshooting and technical support, Troubleshooting the sun blade 2500 workstation, Table – Sun Microsystems Sun Blade 2500 User Manual
Page 51: Chapter, Describes workstation tr, Oblems during power on, see, Troubleshooting the sun blade
35
C H A P T E R
4
Troubleshooting and Technical
Support
This chapter contains information to help you troubleshoot minor workstation
problems.
This chapter includes information about the following topics:
■
Troubleshooting the Sun Blade 2500 Workstation
■
How to Get Technical Assistance
Troubleshooting the Sun Blade 2500
Workstation
If you experience problems while setting up your workstation, refer to the
troubleshooting information in
.
TABLE
4-1
Troubleshooting Procedures
Symptom
Troubleshooting
Workstation powers on,
but the monitor does
not.
1. Is the Power button for the monitor turned on?
2. Is the monitor power cord connected to a wall outlet?
3. Does the wall outlet have power? Test by plugging in another device.
System stops booting
after the ok prompt is
displayed.
At the ok prompt type: boot
If the system does not boot, contact your system administrator or a Sun Service
Support Center.