Sharp AR-M455N - Manual (Page 61)

FINISHER
3-8
Finisher functions
■ ■ ■ ■ Sort mode
Sorted sets will be delivered.
■ ■ ■ ■ Offset mode
■ ■ ■ ■ Group mode
Groups of prints or copies of the same page will be
delivered.
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.
■ ■ ■ ■ Staple sort mode
Collated sets will be stapled and delivered to the offset tray. The stapling positions, orientation, paper size for
stapling, and stapling capacity are shown below.
Original Printouts
Offset mode Non-offset mode
Original Printouts
Stapling positions
Top left corner of
printouts
Center left two
positions of printouts
Lower left corner
of printouts
Portrait orientation Landscape orientation
Available paper sizes: 8-1/2"
x 11", A4 and B5
Stapling capacity: Up to 30
sheets for any available sizes
Same as above
Same as above
Stapling cannot be made.
NOTES
● Stapling can only be done when the offset tray has been selected.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
NOTE
Transparency film heavy paper, punched paper, labels , envelopes and postcards cannot be stapled.