Specifications, Automatic document feeder – Sharp AR-M455N User Manual
Page 176
8-2
SPECIFICATIONS
Automatic document feeder
*
Maximum of 15 sheets when originals are heavier than 28 lbs.(105 g/m
2
). If the number of placed sheets exceeds
this, scanning of the originals will not take place correctly and an extended image may result.
Type
Console
Print system
Electrophotographic system
Photoconductive type
OPC drum
Developer system
Dry-type two-component magnetic brush development
Fusing system
Heater roller
Resolution
Scan: 600 x 600 dpi, output: 600 x 600 dpi
Gradation
256 levels
Originals
Sheets, bound documents
Maximum size: 11" x 17" or A3
Copy paper
Plain paper and special papers
Copy sizes
Max. 11" x 17" or A3, min. 5-1/2" x 8-1/2"R or A5R, Postcard
Image loss: Max 21/64" or 8 mm (leading edge and trailing edge in total),
max. 21/64" or 8 mm (along all other edges in total)
Warm-up time
80 seconds or less
First-copy time
AR-M351N
4.9 seconds or less*
AR-M451N
4.4 seconds or less*
* Conditions: The document glass is used and A4 size paper is fed horizontally from
the machine tray (tray 1).
Copy ratio
Variable: 25 to 400% in 1% increments, total 376 steps
Fixed presets: 25%, 50%, 64%, 77%, 100%, 121%, 129%, 200% and 400% for
inch system, 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200% and
400% for AB system.
Continuous copy
999 copies
Dimensions
(including automatic
document feeder)
32-33/64" (W) x 26-11/64" (D) x 44-23/64" (H)
(826 mm (W) x 665 mm (D) x 1127 mm (H))
Weight
Approx. 220.5 lbs. (Approx. 100 kg)
Overall dimensions
(When tray is extended)
37-29/32" (W) x 26-11/64"(D) (963 mm (W) x 665 mm (D))
Required power supply
For power supply requirements, see the name plate located on the back of the
main unit.
Operating conditions
Temperature: 50°F to 86°F (10°C to 30°C)
Humidity: 20% to 85%
Name
B/W scanner module/DSPF
Original size
11" x 17" to 5-1/2" x 8-1/2" (A3 to A5)
Weight of originals
14 to 34 lbs. (50 to 128 g/m
2
)
Number of originals
Maximum 50 sheets (maximum 30 11" x 17" or 8-1/2" x 14" (A3 or B4) size
sheets*), stack height must not exceed the heights indicated below.
14 to 21 lbs. (50 to 80 g/m
2
): 17/64" (6.5 mm) or less
21 to 34 lbs. (80 to 128 g/m
2
): 13/64" (5 mm) or less
Power supply
Supplied from machine
Dimensions
32-7/16" (W) x 23-55/64" (D) x 7-31/64" (H) (824 mm (W) x 606 mm (D) x 190 mm (H))
Weight
Approx. 46.3 lbs. (21.0 kg)
Some discrepancies may exist in the illustrations and content due to improvements to the machine.