Sharp AR-M455N - Manual (Page 26)

1-17
1
TURNING THE POWER ON AND OFF
Use the power switch on the front of the machine to turn the power on or off.
Power switch
"OFF" position
"ON" position
CAUTION
Before turning off the main power switch, make sure
that the communication and data indicators are not
blinking on the operation panel. Turning off the main
power switch or unplugging the power cord while the
lights are blinking may damage the hard disk and
cause the data being stored or received to be lost.
NOTES
● Turn both switches off and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm
nearby, or when you are moving the machine.
● If the fax function has been added, always keep the fax power switch turned on. Faxes cannot be received if the
fax power switch is turned off. (Faxes can be received when the main power switch is turned off.)