Setup, Wap profile settings – Siemens C56 User Manual
Page 72
Setup
71
WAP profile settings
Up to 5 WAP profiles can be set (may
be barred by the service provider).
The entries may vary depending on
your service provider. To set a new
profile:
Select profile.
§Edit§
Open menu.
Select profile range and
make your settings/en-
tries field by field.
§Edit§
The entry card is dis-
played.
If necessary, check with your service
provider for details:
§Save§
The settings are stored
and the profile list is
shown.
Activate the set WAP
profile (p. 42).
Profile
name:
Enter/change name.
WAP Pa-
rameters
IP address:
* Enter IP
address.
Port:
* Enter port number.
Homepage:
Enter homepage
(p. 40), if not set by the service
provider.
Linger time:
Enter time in
seconds after which a connec-
tion should be ended if no in-
put or data exchange takes
place.
*) depends on the service
provider, if necessary enter
2nd IP address and 2nd
port.
CSD set-
tings
(Circuit
Switched
Data)
Dial-up no.:
Enter ISP
number.
Call type:
Select ISDN or
Analogue.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of
asterisks).
GPRS
settings
(General
Packet
Radio
Service)
GPRS deactivated:
Yes/No.
APN:
Enter the address of
your service provider.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of
asterisks)