Getting started, Charge battery – Siemens C56 User Manual

Page 14

Getting Started

Charge battery

The battery is not fully charged

when delivered. Plug in the charger

cable at the bottom of the phone,

plug in the power supply unit to the

main power socket and charge for at

least two hours.

Display when charging is

in progress

Charging time
An empty battery is fully charged af-

ter about 2 hours. Charging is only

possible in an ambient temperature

of 41°F to 104°F (the charge icon

flashes as a warning when the tem-

perature is 41°F above/below this

range). The voltage specified on the

power supply unit must not be ex-

ceeded.
To use the full performance of the

battery, the battery must be fully

charged and discharged at least five

times.

Charge icon not visible
If the battery is totally discharged no

charge icon is displayed when the

charger is plugged in. It is displayed

after 2 hours at most. In this case

the battery is fully charged after

3-4 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-

tion (empty-full):

0 3 6

A beep sounds when the battery is

nearly empty. The charge level of the

battery is displayed correctly only af-

ter uninterrupted charging/discharg-

ing. You should not remove the bat-

tery unnecessarily nor end charging

prematurely, if possible.

Note
The charger heats up when used for long

periods. This is normal and not dangerous.
Operating times.................................p. 85
Quality declaration for the battery..... p. 86