Siemens C56 - Manual (Page 21)

Making a phone call
20
a
call
Dialing with number keys
The phone must be switched on
(standby mode).
Enter the number (always
with prefix, if necessary
with the international di-
aling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
Press the Call key. The
phone number displayed
is dialed.
End call
Press the End key briefly.
The call is ended. Press
this key even if the person
on the other end of the
line has hung up first.
Set volume
You can activate adjust-
ment of the handset vol-
ume with the control key
(at the top), but only dur-
ing a call.
Set volume.
If a Car kit is used, its volume setting
does not affect the usual setting on
the phone.
Redial previous numbers
To redial the phone number last
called:
Press the Call key twice.
To redial other numbers that were
dialed previously:
Press the Call key once.
Pick out the required
phone number from the
list, then press...
... to dial.
Note
| Store number .........................p. 25
§Options§ Call lists.............................p. 33
§Hold§ Swap/Multi party .....................p. 22
y menu§ Call menu ..........................p. 24
§Call fwd.§ Call forward set ................p. 67
§Handsfr.§ Handsfree.........................p. 22
Voice dialing......................................p. 29
International dialing codes................ p. 84
Auto key lock.....................................p. 67
Phone number memo........................p. 86
Mute on .............................................p. 24
Phone number transmission off/on
(Hide ID)............................................p. 67
Control codes (DTMF).......................p. 82