SMC Networks SMC Barricade SMCBR24Q - Manual (Page 81)

SMCBR24Q User Manual
Page 81
Rate Control
Interface: Check the WAN interface box, and the Rate Control Rule will apply to the selected interface (s).
Service: Select the Service from the drop-down menu. If the Service you need to control is not in the drop
down menu list, please click Service Management to add the Service.
IP: Enter the IP Address or IP range you need to control. The default is zero which includes all internal IP
addresses.
Direction: Select Upstream for outbound traffic or Downstream for inbound traffic from the drop-down
menu.
Min. Rate (Kbit/sec): Enter the Mini. Rate for guaranteeing bandwidth.
Max. Rate (Kbit/sec): Enter the Max Rate for limiting bandwidth.
Enable: Check the box and push the Q-button on to enable this Rate Control Rule.
Add to list: After set up the rule, click the Add to list button. The max entry is 30.