SMC Networks SMC Barricade SMCBR24Q - Manual (Page 11)

SMCBR24Q User Manual
Page 11
Basic Setup
The Setup screen contains all of the router’s basic setup functions. For most users, the default values for the
device should be satisfactory. The device can be used in most network settings without changing any of the
values. Some users will need to enter additional information in order to connect to the Internet through an ISP
(Internet Service Provider) or broadband (DSL, cable modem) carrier.
Network
Network
Host Name & Domain Name: Enter a host and domain name for the Router. Some ISPs (Internet Service
Providers) may require these names as identification and these settings can be obtained from your ISP. In
most cases, leaving these fields blank will work.
LAN Setting
This is the Router’s LAN IP Address and Subnet Mask. The default value is 192.168.1.1 for IP address and
255.255.255.0 for the Subnet Mask.
WAN Connection Type: