SMC Networks SMC Barricade SMCBR24Q - Manual (Page 66)

SMCBR24Q User Manual
Page 66
Enable DHCP Server: Check the box to enable the DHCP Server. If you already have a DHCP server on
your network, leave the box blank.
Dynamic IP
Client Lease Time: This is the lease time assigned if the computer (DHCP client) requests one. The range
is 5 ~ 43,200 Minutes.
Range Start/End: Enter a starting IP address and ending IP address to make a range to assign dynamic
IPs. The default range is 100~149.
Static IP
The administrator can assign the Static IP for the specific client based on this user’s MAC address. Enter
the Static IP Address and MAC Address, and then click the Add to list button. You can set up to 30 static
IP entries.
DNS
You can assign the DNS server(s) to the DHCP clients. This is optional, and the Router will use these for
quicker access to functioning DNS service.
WINS Server
Windows Internet Naming Service (WINS) is a service that resolves NetBIOS names to IP addresses. The
WINS is assigned if the computer (DHCP client) requests one. If you do not know the WINS, leave it as 0.
For more information, click the Help button. Click the Save Settings button to save the Setup settings or
click the Cancel button to undo the changes.