SMC Networks SMC Barricade SMCBR24Q - Manual (Page 78)

SMCBR24Q User Manual
Page 78
Retry timeout: The interval between two ping actions. The default is 30 seconds.
When Fail:
Generate the Error Condition in the System Log: The Router will generate the System Log when ping fails
to inform users that the ISP connection is disconnected.
Remove the Connection: This WAN Interface will be suspended when the network connection to ISP is not
active. The traffic on this WAN will be dispatched to the other WAN port. Once connection to ISP is
re-established, the traffic will be dispatched back.
If you enable NSD, you have to choose at least one option from the following four items.
Default Gateway: If you check this item, the Router will ping the default gateway first.
ISP Host: After pinging Default Gateway, the Router will ping ISP Host “Retry timeout” later. The ISP Host
is provided by ISP.
Remote Host: Enter the IP address of Remote Host that you’re going to ping.
DNS Lookup Host: Enter the Host Name or Domain Name that you’re going to ping.