Set n /216-inch line feed simulation, Esc> “3” n (1b), 1n 255 – Star Micronics SP300 User Manual
Page 46: Set n /144-inch line feed, Esc> “y” n (1b), 8 dot single density bit image, N1 (00), M1 m2
– 42 –
EXAMPLE
Set n/216-inch line feed simulation
CODE
(1B)
H
(33)
H
n
DEFINITION RANGE
1
n
255
OUTLINE
Line feed is set at n/216-inch after this code is received.
According to the minimum paper feed pitch of the connected
mechanism, the amount of line feed is set as follows:
For 1/72”-pitch mechanisms: INT {(n/3)}/72-inch.
For 1/144”-pitch mechanisms: INT {(2n/3)+0.5}/144-inch.
FUNCTION
Set n/144-inch line feed
CODE
(1B)
H
(79)
H
n
DEFINITION RANGE
1
n
255
OUTLINE
Line feed is set at n/144-inch after this code is received.
* 1/72-inch type mechanism only
FUNCTION
8 dot single density bit image
CODE
(1B)
H
(4B)
H
n1 (00)
H
m1 m2 ...
DEFINITION RANGE
1
n1
200
OUTLINE
Excutes 8 dot bit image print determined by “n1”. The total
number of bit image data bytes in one line is equal to n1.
The printer ignores any data bytes over the specified amount
allowed in one line. When the bit image print is finished the
printer automatically returns to the character mode.
D
8
D
7
D
6
D
5
D
4
D
3
D
2
D
1
MSB
LSB
Image data
Dot Position
1
2
3
4
5
6
7
8
9
(Not Used)