4. control codes used for graphics printing – Star Micronics SP300 User Manual
Page 45
– 41 –
7-4. Control Codes Used for Graphics Printing
FUNCTION
Set 7/72-inch line feed
CODE
(1B)
H
(31)
H
OUTLINE
Line feed is set at 7/72-inch after this code is received.
FUNCTION
Define n/72-inch line feed
CODE
(1B)H (41)H n
DEFINITION RANGE
0
n
85 (Default n = 12)
OUTLINE
Line feed is defined at n/72-inch after this code is received.
This code sets the feed at n/72-inch with the
FUNCTION
Set n/72-inch line feed
CODE
(1B)
H
(32)
H
OUTLINE
This code sets the line feed at a defined value with the
“A” previously described.
FUNCTION
One time line feed of n/72-inch
CODE
(1B)
H
(4A)
H
n
DEFINITION RANGE
1
n
255
OUTLINE
This code activates the n/72-inch paper feed once.
FUNCTION
Set 1/12-inch line feed
CODE
(1B)
H
(7A)
H
(30)
H
or (1B)
H
(7A)
H
(00)
H
OUTLINE
Line feed is set at 1/12-inch after this code is received.