2. control codes used for line spacing – Star Micronics SP300 User Manual

Page 40

– 36 –

FUNCTION

Cancel highlighted print mode

CODE

“5”
(1B)

(35)

OUTLINE

Cancels highlighted print mode.

FUNCTION

Select inverted print mode

CODE

(0F)

OUTLINE

Data following this code is printed out in inverted characters.
This code is valid only when input at the beginning of a line,
thus, normal and inverted characters cannot be mixed in on
the same line.

FUNCTION

Cancel inverted print mode

CODE

(12)

OUTLINE

Cancels the inverted character mode. This code is valid only
when input at the beginning of a line.

7-2. Control Codes Used for Line Spacing

FUNCTION

Line feed

CODE

(0A)

OUTLINE

Data in the line buffer is printed out and one line is fed. If data
does not exist before this code is received, the printer only
feeds one line.

FUNCTION

Line feed (Same as LF)

CODE

(0D)

OUTLINE

Functions the same as an LF code.
When DIP SW 1-3 is set to ON, this code becomes invalid.

FUNCTION

Set 1/6-inch line feed

CODE

“z” “1” or “z” <1>
(1B)

(7A)

(31)

or (1B)

(7A)

(01)

OUTLINE

Line feed is set at 1/6-inch after this code is received.