beautypg.com

Safety, Getting the most out of your reception, Keeping tabs on signal strength – Samsung 12172009 User Manual

Page 106: Understanding the power save feature, Understanding how your phone operates, Knowing radio frequency safety

background image

Safety

99

Safety

Safety

Getting the Most Out of Your Reception

Keeping Tabs on Signal Strength

The quality of each call you make or receive depends on the signal strength in
your area. Your phone informs you of the current signal strength by displaying a
number of bars next to the signal strength icon. The more bars displayed, the
stronger the signal. If you’re inside a building, being near a window may give you
better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it’s turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from
0.006 watts to 0.2 watts in digital mode.

Knowing Radio Frequency Safety

The design of your phone complies with updated NCRP standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF signals. More than
120 scientists, engineers and physicians from universities, government health
agencies, and industries developed this updated standard after reviewing the
available body of research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August 1996, the FCC
adopted a hybrid standard consisting of the existing ANSI/IEEE standard and the
guidelines published by the National Council of Radiation Protection and
Measurements (NCRP).

r330 BMC Guide.book Page 99 Thursday, December 17, 2009 11:15 AM