Sony 4-157-878-12(1) - Manual (Page 48)

48
3
Play back movies.
1 Touch the recording media you want to play back.
: Memory card A
: Memory card B
: Flash memory unit
2 Touch the playback mode, and select the desired image quality of movies.
: High definition image quality (HD)
: Standard definition image quality (SD)
3 Touch twice the thumbnail of the movie you want to play back.
The first touch will show the information on the movie at the lower part of the screen.
A Date and time of recording started
B Resolution
C Frame rate
D Record mode
E Duration
F Time code of recording started
Time code will not be displayed correctly when you play back recording media with no time
code, or recording media with time code that your camcorder does not support.
G GPS data (HXR-NX5E/NX5P)
Appears on the movie that was recorded with the GPS switch set to ON.
H LPCM recording
Appears when audio is recorded in Linear PCM. This does not appear for movies in the
standard definition image quality (SD).
• i appears with the movie that has been most recently played back or recorded. If you touch the
movie with i, you can continue playback from the previous time.
Playback mode
Playback (Continued)