Description of display of the handset – Siemens W12 User Manual

Page 5

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Note: The dial mode of this phone has been set to tone dialing. If

you want to change it to pulse dialing, please refer to the descriptions in
the “Tone/Pulse Switch” section to turn to pulse. If you are not sure
which mode to apply, please consult your phone service company.

9ˊPlace your base away from the “interference sources” (e.g.: TV,

PC, microwave oven, refrigerator, etc.) and in a central position of its
range, and if you can place it at a higher position, it will work better. To
obtain the best performance, pull the antenna to its maximum length.

10ˊAdjust the flash time to a required period of time.

Note: Use the power adapter 220V AC 9V DC 220mA in the package.
Using other power adapters might cause damages to your phone.
Note: The dial mode of this phone has been set to be tone dialing.

Description of display of the handset

Line

Number of callers
Channel
VIP records
Batteries. fully charged

Batteries empty
Incoming call records
Outgoing call records