Siemens W12 - Manual (Page 19)

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Replacing batteries
Be sure the handset is in idle status.
1. To open the battery compartment, press the battery cover of the handset and slide it down.
2. Take out the batteries.
3. Insert new batteries into the battery compartment.
4. Push up the battery cover.
5. Place the handset with batteries inserted back in the charger.
6. Note: For the first time, the batteries should be charged for at least 12 hours before use.
7. Battery type: GPI batteries GP30 AAAK3BMJ or the same type.
Safe use of the batteries
1. Never dispose damage or break or expose the batteries in high-temperature environment. If
these batteries are damaged, they will release poisonous materials, just as others of the same
type.
2. Place the batteries out of children’s reach.
Care
z Place the phone at a dry and clean place to avoid the internal components from getting
affected with damp and dirt entering the phone, otherwise, proper operation will be affected.
z When using the phone, try to avoid damaging the external cover of the phone by striking or
beating.
z When the surface of the phone is dirty, clean it with a cloth. Never use chemical solvents,
which might damage internal components.
z Try to apply even force when pressing the keys to protect the phone’s normal operation. If
the phone fails to work, any non-professional personnel is not allowed to open the phone for
repairing. You should bring the phone to the authorized service station in your area or
contact Siemens.
Indicating information
The following respectively indicates:
UNAVAILABLE: Meaning that information about the incoming call
is interrupted due to line failure of the caller or
there is no such a service in the caller’s area or
the information has failed to be transmitted.
NO CALL Meaning that all incoming or outgoing call records
are deleted
RECORD Meaning the record is stored.
19