Siemens W12 - Manual (Page 18)

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Enter PIN 0588.
Enter the restricted number 1689.
Press the Mem/Prog key to confirm. The handset will make a confirmation
tone.
Note: If the entered PIN is different with the stored one, the handset will
make a hint tone.
Cancel Lock Code
For example, Follow the following steps to cancel the lock:
Successively press #, #,1,#.
Enter PIN 0588.
Press the Save/Set key to confirm. The handset or the base station will
make a confirmation tone.
Note: If the entered PIN is different with the stored one, the handset will
make a hint tone.
Temporary Unlocking
Follow the following steps for temporary unlocking of restrained dialing
numbers stored in 1-4 memory area. Lock Code will be restored after 60
sec. of hanging up.
Successively press #, #,5,#.
Enter PIN 0588.
Press the Save/Set key to confirm. The handset or the base station will
make a confirmation tone.
Note: If the entered PIN is different with the stored one, the handset will
make a hint tone.
Unlocking and eliminate PIN
Successively press #, #,6,#.
Enter PIN 0588.
Press the Save/Set key to confirm. The handset or the base station will
make a confirmation tone.
Note: if you forget the PIN, you can also unlock with the following
methods. This method will delete all set parameters in this phone.
Successively press *, *, 4, 0, #, #,
Press Mem/Prog key.
Battery indication
When the battery is flat, the handset will display or the icon will be
flashing, then place the handset back on its charger to charge.
Note: When the battery is flat, your call will be terminated. Then please
place your handset back on its charger to charge for at least 30 minutes.
18