Sanyo PLC-SW30 - Manual (Page 8)

8
q Zoom Lever ( ☞
P20 )
w Infrared Remote Receiver ( ☞
P11 )
e Focus Ring ( ☞
P20 )
r Projection Lens ( ☞
P43 )
t Lens Cover
y Air Intake Vent (
☞
P43 )
u Exhaust Vent
q Air Intake Vent ( ☞
P43 )
w Terminals and Connectors ( ☞
P10, 15,16 )
e Power Cord Connector ( ☞
P12 )
r Exhaust Vent
q Air Filters( ☞
P43 )
w Air Intake Vents ( ☞
P43 )
e Adjustable Feet ( ☞
P14 )
e
w
q
u
y
t
r
i
e
w
q
t
r
y
CAUTION
Hot air is exhausted from the exhaust vents.
When using or installing the projector, the follow-
ing precautions should be taken.
– Do not put any flammable objects near these
vents.
– Keep front grills at least 3’(1m) away from any
objects, especially heat-sensitive objects.
– Do not touch this area, especially screws and
metallic part. This area will become hot while
the projector is being used.
This projector detects internal temperature and
will automatically adjust the running speed of the
cooling fans.
Bottom
q
e
w
Back
Front
Overview
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
i Speaker
t Air Intake Vent ( ☞
P43 )
y Top Controls and Indicators ( ☞
P9 )
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.