Sanyo PLC-SW30 - Manual (Page 10)

10
S-VIDEO
COMPUTER IN /
COMPONENT IN /
COMPUTER /
COMPONENT
AV
AUDIO IN
VIDEO
USB
SERVICE PORT
RESET
✽ RESET button
A microprocessor included in the projector may occasionally
malfunction and need to be reset. If necessary, press this
button with a sharp tool to restart the unit. Do not use it
excessively.
y AUDIO IN COMPUTER/ COMPONENT
Connect audio output from a computer or component to
this jack. (
☞
P15, P16 )
Terminals
Overview
e w q ✽
u t r
u COMPUTER IN / COMPONENT IN
Connect computer output, component output or RGB
Scart 21-pin video output to this connector. (
☞
P15,
P16 )
q VIDEO
Connect the composite video output from video
equipment. (
☞
P16 )
w S-VIDEO
Connect S-video output from video equipment. (
☞
P16 )
e SERVICE PORT
This jack is used to service this projector.
r USB
Connect the USB port of your computer to this port
when you wish to use the PAGE
ed buttons on the
remote control to scroll back and forth pages on the
screen of the connected computer.
(
☞
P15, P38 )
t AUDIO IN AV
Connect audio output from video equipment. (
☞
P16 )
y