Sanyo PLC-SW30 - Manual (Page 20)

20
Press FREEZE button on the remote control to freeze the picture on-
screen. To cancel the freeze function, press FREEZE button again or
press any other button.
Picture Freeze Function
Keystone Adjustment
1 Press KEYSTONE button on the remote control or select
Keystone on the Setting menu (
☞
P36 ) to display the Keystone
dialog box.
2 Correct keystone distortion by pressing Point ed buttons.
Press Point e button to reduce the upper part of image, and
press Point d button to reduce the lower part.
Reduce the upper width with Point e button. Reduce the lower width Point d button.
If a projected picture has keystone distortion, correct image with the keystone adjustment.
Basic Operation
Move the Zoom Lever upward / downward to zoom the image.
Rotate the Focus ring to adjust the projected picture focus.
Focus Ring
Tele
Wide
Zoom Lever
– Arrows are white in no correction.
– The arrow of direction being corrected turns
red.
– The arrow disappears at the maximum
correction.
– If you press the KEYSTONE on the remote
control once more while the keystone dialog
box is being displayed, the adjustment will be
canceled.
Focus Adjustment
Zoom Adjustment
Adjusting the Screen