Samsung CX1 - Manual (Page 79)

77
Sh
oot
in
g M
o
d
e
Ty
p
e
s
3
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
Press the MENU button.
• The scene mode selection screen appears.
3
Press the ADJ./OK button !"#$ to select [Face].
4
Press the ADJ./OK button.
5
Compose your picture.
• When a face is recognized, a frame with the size of the recognized
face is displayed in blue.
• Up to four frames can be displayed.
6
Half-press the shutter release button.
• Even if several faces are recognized, the camera selects the optimal
focus. When a recognized face is focused, the frame for that face is
displayed in green. If the camera cannot focus on a recognized face,
the frame for that face disappears.
• The exposure and white balance are locked.
7
Gently press the shutter release button all the way.
Caution------------------------------------------------------------------------------------------
The camera may not be able to recognize faces in the following cases:
• When the face is side-view, tilted, or moving
• When the camera is tilted or upside down (the shutter release button is facing down)
• When part of the face is hidden
• When the face is not clearly visible because of dark surroundings
• When the subject is too far away (Make sure that the face appearing in the picture
display is vertically longer than 1 block marked by the grid guide GP.56)
• When the face is at the edge of the picture display
Using Face Recognition Mode