Samsung CX1 - Manual (Page 214)

212
10
A
p
pe
ndi
c
e
s
10 Appendices
If an error message is displayed on the screen, check the
information on the reference page and take the corresponding
action.
Troubleshooting
Error Messages
Error Message Refer to
Insert card. No card is loaded. Insert a card. P.28
Set date. The date is not set. Set the date. P.188
The file number limit has been
exceeded. The file number limit has been exceeded. Use another card. P.187
Unmatched File This file cannot be displayed on the camera. Check the file
contents on your computer, and then delete the file. -
Insufficient memory. Continue? All the files cannot be copied because there is insufficient
memory on the card. Use another card. P.25
Protected The file selected for deletion is protected. P.149
Card Is Write-Protected. The card is locked (write-protected). Unlock the card. P.26
Print settings cannot be applied to
this file. This file (movie or other file) cannot be selected for printing. -
Insufficient Memory Files cannot be stored. Make sure there is sufficient memory
or delete unwanted files. P.52
P.163
P.164
The image print number limit has been exceeded. Select an
image and set the number to 0. P.195
Format internal memory. The internal memory requires formatting. P.164
Format card. The card is not formatted. Format the card with this camera. P.163
Card Error Reformat the card. If the error message still appears after
that, the card may be faulty. Do not use the card. P.163
Writing Data Writing file to memory. Wait until writing finishes. -
File not found There are no files that can be played back. -
Out of memory. cannot record. The number of remaining shots is 0. Switch to another card
or the internal memory. P.25
No files to restore. There are no files to restore. P.157