Southbend 14" Turn-X Toolroom Lathe SB1039 - Manual (Page 64)

-62-
For Machines Mfg. Since 5/11 14" TURN-X ® Toolroom Lathe A C C E S S O R I E S
SB1298—SBL Bench Lathe Shop Clock
SB1299—SBL Toolroom Lathe Shop Clock
SB1300—SBL Lathe with Man
These fine traditional shop clocks are constructed
with a metal antique-finished frame. They are
easy to read from a distance and measure 14"
in diameter. Pictures just don't do them justice.
They are very nice quality clocks and perfect for
the South Bend Lathe aficionado.
Figure 95. Antique-finished South Bend shop clocks.
SB1298 SB1299
SB1300
Keyless Integral Chucks
SB1379—MT #3 1 ⁄
2
"
SB1380—MT #3 5 ⁄
8
"
These keyless chucks are produced with an
integral shank to maximize concentricity
between the body, shank, and jaws. They start
as a one-piece high-alloy body which is turned,
then finish ground throughout, making them as
close to zero TIR (Total Indicated Runout) as can
be. Keyless chuck self-tighten, so a spanner is
provided to ease tool removal.
Figure 94. MT #3 Keyless Chuck.
SB1354—South Bend Cast-Iron Workbench Legs,
1 Pair
Designed with smooth flowing lines reminiscent
of the early 1900's, these heavy cast-iron legs
provide plenty of support and stability for shop-
made workbenches or machine stands. Just add
your own bench top and bottom shelf to suit
your particular needs. Each leg weighs in at 107
pounds and provides plenty of mass to dampen
machine operations or provide an extremely
stable work surface. The South Bend Lathe logo
is also proudly displayed on each leg on a thick
brass nameplate as a reminder that these cast-
iron legs will stand up to a lifetime of dependable
service. Distance from floor to top support: 36 1 ⁄
2
";
distance from floor to shelf support tab: 7 1 ⁄
2
".
Figure 96. South Bend Cast-Iron Workbench Legs
Bench Top
& Shelf Not
Included