Programming the remote control – Sony GRAND WEGA KDS-R70XBR2 User Manual

Page 32

Basic Operations

F:\Worker\SONY SXRD-R\2699721111(062606)\030BAS.fm

masterpage:3 columns Right

KDS-R60XBR2/KDS-R70XBR2

2-699-721-11(1)

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Follow the steps below to program your TV’s remote control to operate non-
Sony video equipment.

Find the three-digit code for your equipment from the “Manufacturer’s
Codes” listed on page 33. If more than one code number is listed, try
entering from the code listed first.

1 Press and hold the

FUNCTION

button you want to

program on the remote control and press the

button simultaneously.

The selected

FUNCTION

button (BD/DVD, DVR/VCR or

SAT/CABLE) will flash.

2 Within 10 seconds (while the

FUNCTION

button is lit), enter the three-

digit manufacturer’s code number using the --9 buttons.
If the code is not entered within 10 seconds, you must start again from
step 1.

3 Press the

button while the FUNCTION button is lit.

When the programming is correct, the selected

FUNCTION

button

blinks twice, and when not, blinks five times.

To check if the code works

Aim your TV’s remote control at the equipment, and press the green

button. If you can turn the equipment on and off by using the remote control,
then the programming is complete. If not, try the next code listed.

Sony Equipment

Programmable Code Number

BD/DVD

101 (Sony Blu-ray Disc Player)

DVR/VCR

901 (Sony Dream System)

SAT/CABLE

801 (Sony Satellite Receiver)

✍

Although ,

and

buttons are labeled as such, you can still

program any of your connected equipment using any one of the buttons
regardless of the label. For example,

button can be programmed to

operate your VCR. If you have a DVD/VCR combo that you want to
operate with your TV remote control, you can program with the

or even the

, but remember which button you have

programmed for your particular use.

✍

If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically goes
back to the previous setting.

✍

In some cases, you may not be able to program your remote control to
operate other equipment. In such cases, use the equipment’s own
remote control.

BD/DVD

DVR/VCR

SAT/CABLE

DIS

BD/DVD

DVR/VCR

SAT/CABLE

BD/DVD

DVR/VCR

SAT/CABLE

POWER