Sony 3CCD COLOR BRC-300P - Manual (Page 12)

Ov
er
v
ie
w
System Configuration
12
Operating a BRC-300/300P Camera from a Long Distance
This system allows you:
• To operate the camera remotely from a distance up to 500 m (1,640 feet)
• To perform pan/tilt and zoom operations comfortably using the joystick
• To transmit the video signal and control signal of the camera to a distant place using the Optical Fiber Cable
System configuration
Notes
• The BRC-300/300P camera does not operate if nothing is connected to the BRBK-303 Optical Multiplex Card
inserted into the camera. To operate the camera, connect the BRU-300/300P Optical Multiplex Unit to the BRBK-
303 using the CCFC-M100 Optical Fiber Cable and turn on the power of the BRU-300/300P.
• When the BRBK-303 Optical Multiplex Card is inserted into the BRC-300/300P camera, the EXT SYNC connector,
VISCA RS-232C IN/OUT connectors and VISCA RS-422 connector on the rear of the camera and the BOTTOM
switches on the bottom of the camera are disabled. Use the connectors and switches on the rear of the BRU-300/300P
Optical Multiplex Unit instead.
,
BRC-300/300P
BRBK-303 Optical Multiplex Card
CCFC-M100 Optical Fiber Cable
RM-BR300 Remote Control Unit
Video monitor, VTR, etc.
BRU-300/300P
Optical Multiplex
Unit
Video signal
Remote control (VISCA) signal
Signal flow