Star Trac S-UBX - Manual (Page 26)

26
620-7992 Rev 001
Adjusting Channel Menu Options
(Continued)
Add On CH
Search
Select to manually search for channels that
can not be memorized.
1. In Channel menu, select Add On CH
Search item, press VOL+ to access.
2. During Add On CH search, your unit
searches for digital channels first. When
the digital channel search is complete, a
confirmation box appears asking if you
want to scan analog channels. Press OK
or wait for some seconds to continue
searching for analog channels. (Press
VOL+ to select Cancel, and press OK to
stop searching for channels.)
Option Description
Channel Editor Lets you delete channels from the channel list
so your unit skips the channels when you
press CH+/- button. You can still tune to the
channel using the number buttons.
1. In Channel menu, select Channel Editor
item, press VOL+ to access.
2. Press CH+/- to select the channel you
want to edit. Press VOL+/- to select view-
able to show the channel and select not
viewable to hide the channel.
1. In Channel menu, select Channel Labels
item, then press VOL+ to open the chan-
nel labels screen.
2. Press VOL+/- to select the channel num-
ber you want to label.
3. Press CH- to move to the channel label
field, then press OK to access. Press CH+/-
to select a character, then press VOL+/- to
move to the next/previous character. Re-
peat this step to add more characters.
4. After finishing inputting, press OK to con-
firm. And the cursor will move to Save.
5. Press OK to save the setting or press CH-
to select Preset and press OK to reset
most setting of current source to Channel
Labels default settings.
Channel Labels If a channel is not already labeled, you can label the channel to make it easier to identify.
Also you can rename the channel already labeled.